October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Oil Pump Chain: Removal
- Remove the transmission body. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TRANSMISSION ASSEMBLY>REMOVAL .
- Remove the torque converter. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TORQUE CONVERTER>REMOVAL .
- Remove the oil pump chain, oil pump sprocket, driven sprocket and oil pump chain cover.
NOTE:
Oil pump chain cover may be hard to remove because the driven sprocket is installed to the shaft side of the oil pump. In this case, remove it while holding the driven sprocket by hand.
 Courtesy of SUBARU OF AMERICA, INC.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the seal rings.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the driven sprocket from oil pump chain cover to remove the oil pump chain.
NOTE:
- The driven sprocket is a non-disassembly part.
- If the ball bearing is removed from the driven sprocket, replace it with a new part.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the snap ring.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the drive sprocket.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the oil seal.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the liquid gasket from the oil pump chain cover and the converter case.