LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Stabilizer >> Installation >> Stabilizer Bushing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Stabilizer Bushing

  1. Before installation, inspect the following items and replace any faulty part with a new one. Check the bushing stabilizer rear for abnormal cracks, fatigue or damage.
  2. Install the bushing stabilizer rear.
  3. Install the clamp stabilizer.

    Tightening torque: 

    30 N.m (3.1 kgf-m, 22.1 ft-lb)

  4. Install the bracket COMPL stabilizer.
    CAUTION: To prevent damage to the vehicle body, place a cloth, etc. between the bracket COMPL stabilizer and the vehicle body. After tightening nuts to specified torque, be sure to remove the cloth, etc.

    Tightening torque: 

    35 N.m (3.6 kgf-m, 25.8 ft-lb)

  5. Install the rear wheels and lower the vehicle.

    Tightening torque: 

    120 N.m (12.2 kgf-m, 88.5 ft-lb)

scientia non olet · About LEMON Manuals