October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Wheel Alignment: Inspection: Camber
- Place the tires on the turning radius gauge.
NOTE:
Make sure that the ground contact surfaces of the front tires and rear tires are at the same level.
- Set the adapter into the center of wheel, and then set the wheel alignment gauge.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Measure the camber angle in accordance with the instructions for wheel alignment gauge.
| Front camber (difference between RH and LH 45' or less) |
Rear camber (difference between RH and LH 45' or less) |
| -0°05'±0°45' |
-0°50'±0°45' |