October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Rear ABS Wheel Speed Sensor: Removal
- Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY
.
- Lift up the vehicle, and then remove the rear wheels.
- Remove the sensor sub assembly rear.
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
- Leave the sensor harness clamp on the vehicle side.
- Disconnect the sensor sub assembly rear connector.
- Remove the harness clamp and bolts, and remove the sensor sub assembly rear from the rear axle housing.
 Courtesy of SUBARU OF AMERICA, INC.
|