LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Power Window Control Switch >> Inspection >> Sub-Switch >> Switch Power Window Sub Rear
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Switch Power Window Sub Rear

  1. Measure the resistance between terminals of the switch power window sub rear.

    Preparation tool: 

    Circuit tester

    • Base grade, except for base grade (model without telematics)
      G12398776Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      1 - 2
      5 - 4      		 OFF Less than 1 Ω
      2 - 3
      3 - 4
      1 - 3
      3 - 5      		 1 MΩ or more
      3 - 2
      5 - 4      		 Manual UP Less than 1 Ω
      1 - 2 1 MΩ or more
      1 - 2
      3 - 4      		 Manual DOWN Less than 1 Ω
      4 - 5 1 MΩ or more
    • Except for base grade (model with telematics)
      G12398775Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      5 - 6 OFF Less than 1 Ω
      2 - 5
      2 - 6      		 1 MΩ or more
      2 - 6 Manual UP Less than 1 Ω
      5 - 6
      2 - 5      		 1 MΩ or more
      2 - 5 Manual DOWN Less than 1 Ω
      5 - 6
      2 - 6      		 1 MΩ or more
  2. Apply battery voltage between the switch power window sub rear terminals to check lighting condition of illumination inside the switch.
    CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side. Incorrect polarity connection may cause LED damage inside the switch.
    • Base grade, except for base grade (model without telematics)
      Terminal No. Inspection conditions Standard
      3 (+) - 1 (-)
      3 (+) - 5 (-)      		 Apply battery voltage. Light ON
    • Except for base grade (model with telematics)
      Terminal No. Inspection conditions Standard
      7 (+) - 2 (-) Apply battery voltage. Light ON
  3. Replace the switch power window sub rear if it is found defective from the inspection result.
scientia non olet · About LEMON Manuals