LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Installation >> Stabilizer Bushing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Stabilizer Bushing

  1. Before installation, inspect the following items and replace any faulty part with a new one.

    Check the stabilizer bushing for abnormal cracks, fatigue or damage.

  2. Install the bushing - stabilizer.
  3. Install the clamp - stabilizer bushing.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  4. Install the front exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>INSTALLATION .
  5. Install the crossmember support - rear.

    Tightening torque: 

    70 N.m (7.1 kgf-m, 51.6 ft-lb)

  6. Install the undercover - front.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

scientia non olet · About LEMON Manuals