Solenoid Unit

Remove the select lever. Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL
Remove the spacer and gasket, Ref. to CONTROL SYSTEMS>SELECT LEVER>DISASSEMBLY>SELECT LEVER .
Remove the connector from plate.

Courtesy of SUBARU OF AMERICA, INC.
Raise the claw with a flat tip screwdriver, etc. and remove the solenoid unit.

Courtesy of SUBARU OF AMERICA, INC.
Pull out the terminal (A) of the solenoid unit using KTC connector terminal tool (part number: ECC-1T).
NOTE: A flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less can also be used.

Courtesy of SUBARU OF AMERICA, INC.