LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Lubrication System (Except For STI)) >> Oil Level Switch >> Removal >> When Removing Front CROSSMEMBER
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

When Removing Front CROSSMEMBER

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front crossmember. Ref. to FRONT SUSPENSION>Front Crossmember>REMOVAL .
  2. Disconnect the oil level switch connector from the engine wiring harness, and remove the clip (A) securing the harness.
    G09476614
  3. Remove clip (A) from the oil pan upper, and remove the oil level switch.
    G09476529
scientia non olet · About LEMON Manuals