When Front CROSSMEMBER Has Been Removed

WARNING: This page is about a different variant/trim than selected.

Install the oil level switch and the clip (A) to the oil pan upper.
NOTE:
- Use new O-rings.
- Apply a coat of engine oil to the O-rings.
Tightening Torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
Connect the connector of oil level switch to the engine wiring harness, and install the clip (A) securing the harness.
Install the front crossmember. Ref. to FRONT SUSPENSION>Front Crossmember>INSTALLATION .