September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Rear Sub Switch
- Remove the switch - power window sub.
- Check the resistance between terminals of the switch - power window sub.
| |
TERMINAL NO. |
INSPECTION CONDITIONS |
STANDARD |
| Rear |
4 - 5
7 - 8 |
OFF |
Less than 1 Ω |
5 - 6
6 - 8 |
1 MΩ or more |
5 - 6
7 - 8 |
UP |
Less than 1 Ω |
4 - 5
4 - 8 |
1 MΩ or more |
4 - 5
6 - 8 |
DOWN |
Less than 1 Ω |
4 - 6
7 - 8 |
1 MΩ or more |
- Check the switch light illumination condition.
| |
TERMINAL NO. |
INSPECTION CONDITIONS |
SPECIFICATION |
| Rear |
6 - 7, 4 |
Battery connection between terminals |
Light ON |
- Replace the switch - power window sub if it is found defective.