LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control Systems >> AT Shift Lock Solenoid and "P" Range Switch >> Removal >> Solenoid Unit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Solenoid Unit

  1. Remove the AT select lever. Ref. to CONTROL SYSTEMS>Select Lever>REMOVAL 
  2. Remove the spacer and gasket. Ref. to CONTROL SYSTEMS>Select Lever>DISASSEMBLY 
  3. Using a flat tip screwdriver with a thin tip, remove the harness connector.
    G10319298
  4. Raise the claw with a flat tip screwdriver with a thin tip and remove the solenoid unit.
    G10319330
  5. Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.
    G12448335
scientia non olet · About LEMON Manuals