LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical (STI)) >> Preparation For Overhaul >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Preparation For Overhaul: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. After removing the engine from vehicle body, attach the ST to the engine as shown in the figure.

    ST1 498457000

    ENGINE STAND ADAPTER RH

    ST2 498457100

    ENGINE STAND ADAPTER LH

    ST3 499817100

    ENGINE STAND

    G04998651Courtesy of SUBARU OF AMERICA, INC.
  2. In this article the procedures described under each index are all connected and stated in order. The procedure for overhauling of the engine will be completed when you go through all steps in the process.

    Therefore, in this article, to conduct the particular procedure within the flow, you need to go back and conduct the procedure described previously in order to do that particular procedure.

scientia non olet · About LEMON Manuals