LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Power Window Control Switch >> Removal >> Sub-Switch >> Switch - power window sub rear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch - power window sub rear

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>REMOVAL>REAR DOOR .
  3. Remove the panel - power window sub switch rear.
    CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
    1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
    2. Remove the screws.
      G10272707Courtesy of SUBARU OF AMERICA, INC.
    3. Release the claws, and then remove the panel - power window sub switch rear.
    G10272708Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the switch - power window sub rear.
G10272709Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals