LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (Diagnostics - Introduction)) >> Inspection Mode >> Procedure >> Inspection Mode J
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Mode J

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
DTC Item Condition Number of driving cycles on the detecting condition
P2610 ECM/PCM ENGINE OFF TIMER PERFORMANCE - 2

Diagnostic procedure: 

  1. Idle the engine for 15 minutes or more.
  2. Turn the ignition switch to OFF.
  3. After at least 10 hours passed from the start of step  2, read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (diag)>DIAGNOSTIC TROUBLE CODE (DTC) .
scientia non olet · About LEMON Manuals