LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Operation >> Impact Sensor Setting Using SUBARU Select Monitor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Impact Sensor Setting Using SUBARU Select Monitor

  1. Make an impact monitor setting.
    1. Connect the Subaru Select Monitor.
      NOTE: For detailed operation procedures, refer to "Application help".
    2. Turn the ignition switch to ON.
    3. On «Start» display, select «Diagnosis».
    4. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
    5. On «Main Menu» display, select «Each System».
    6. On «Select System» display, select «Body Control» and then select «Enter».
    7. On «Select Function» display, select «Customize».
    8. From the Customize item list, select «Impact sensor» or «Impact Sensor Setup».
    9. Make an impact monitor setting.
      • When installing: ON
      • When removing: OFF
    10. Make an impact monitor ON/OFF setting.
      • When installing: ON
      • When removing: OFF
    11. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.
scientia non olet · About LEMON Manuals