LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Hill Hold Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hill Hold Switch: Installation

  1. Install the hill hold switch.
  2. Install the cover assembly - front. Ref. to INSTALLATION , Console Box.
  3. Connect the ground terminal to battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
scientia non olet · About LEMON Manuals