Inspection Mode 1
| DTC | Item | Note |
|---|---|---|
| B1401 | METER COLLATION | - |
| B1402 | IMMOBILIZER KEY COLLATION | - |
| B1407 | MET COMMUNICATION | - |
| B1408 | METER NON-VOLATILE MEMORY | - |
| B1410 | TRANSPONDER COMMUNICATION | - |
| B1411 | IMMOBILIZER ANTENNA | - |
| B1413 | IMMOBILIZER CONTROL MODULE BATTERY POWER SUPPLY | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. Ref. to CLEAR MEMORY MODE
- Read the DTC and check that the DTC is not displayed. Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1
- Remove the ignition key from the ignition switch, and insert.
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC)
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.