LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Impreza Base, 4D Wagon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Entertainment System) >> Rearview Camera System >> Removal >> Outback Model
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Outback Model

WARNING: This page is about a different car, the 2017 Subaru Outback and 2017 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
  2. Remove the trim panel - rear gate. Ref. to REMOVAL , Rear Gate Trim.
  3. Remove the garnish assembly - rear gate. Ref. to REMOVAL , Rear Gate Garnish.
  4. Remove the rearview camera assembly.
    CAUTION: Do not drop or apply any impact to the rearview camera because it is a precision equipment.
    1. Disconnect the connector.
    2. Release the claw and hook, and then remove the rearview camera assembly.
    Fig 1: Removing Rearview Camera Assembly Claw And Hook (Outback Model)
    G10272669Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals