LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Impreza Base, 4D Wagon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Entertainment System) >> Rearview Camera System >> Installation >> Outback Model
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Outback Model

WARNING: This page is about a different car, the 2017 Subaru Outback and 2017 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rearview camera assembly.
  2. Install the garnish assembly - rear gate.

    Tightening torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb) 

  3. Install the trim panel - rear gate.
  4. Connect the ground terminal to battery sensor. Ref. to BATTERY
  5. Confirm the marker position. Ref. to INSPECTION , Rearview Camera System.
scientia non olet · About LEMON Manuals