Check Radio Frequency Range Switch-Over

WARNING: This page is about a different car, the 2017 Subaru Outback and 2017 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Displayed only for model with 6.2 inch display.
Some items are not displayed according to destination.

Turn the ignition switch to ACC.
Press the button (a) to display the Audio OFF screen.
Touch the screen in order from (b) to (e).

Fig 1: Identifying Audio Off Screen Button
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the Line Diag mode.
{Line Diag} screen is displayed.

Fig 2: Screen Display - Line Diag
Courtesy of SUBARU OF AMERICA, INC.
Touch {Dealer Diag} on the {Line Diag} screen.
The {Dealer Diag} screen is displayed.

Fig 3: Screen Display - Dealer Diag
Courtesy of SUBARU OF AMERICA, INC.

Touch the {9kHz} or {10kHz} key to switch the AM radio frequency range.

Display key	Frequency range
9 kHz	Set the AM frequency range to 531 - 1629 kHz.
10 kHz	Set the AM frequency range to 530 - 1710 kHz.

NOTE:

When the setting is changed, reboot confirmation for frequency switch-over is displayed. Select {OK} to reboot. When {cancel} is pressed, the {Dealer Diag} screen is displayed.
The initial settings is at 9 kHz.