Cruise Control System (Diagnostics)
- Basic Diagnostic Procedure
- Check List for Interview
- General Description
- Electrical Component Location
- Control Module I/O Signal
- Diagnostic Procedure for Subaru Select Monitor Communication
- Real-time Diagnosis
- Cancel Code
- Diagnostic Procedure with Cancel Code
- DTC 11: When CRUISE switch is pressed, or a malfunction related to CRUISE switch occurs, this is detected.
- DTC 12: Detected when the brake pedal is depressed, or the error related to the stop light & brake switch occurred.
- DTC 13:
- DTC 14: Detected when the select lever is shifted to the neutral position, or when an error related to the neutral position switch occurs.
- DTC 15: Detected when CANCEL switch is pressed or malfunction related to CRUISE switch occurs.
- DTC 16: Detected when ignition switch is turned to OFF or malfunction related to the ignition switch occurs.
- DTC 21: Cruise control command switch malfunction is detected.
- DTC 22: Malfunction related to vehicle speed sensor is detected.
- DTC 24: Switch malfunction related to cruise control is detected.
- DTC 31: Malfunction related to engine speed signal is detected.
- DTC 32: Detected outside the system operation vehicle speed range.
- DTC 34: The vehicle was driven at higher speed than the set vehicle speed for a long time (approximately 10 minutes) during cruise driving.
- DTC 35: Detected when the vehicle speed feedback is not possible.
- DTC 41: VDC/TCS/EPB is operated.
- DTC 43: Detected that part or all of the functions of ABS/VDC are not able to function.
- DTC 44: Body integrated unit malfunction is detected.
- DTC 45: Combination meter malfunction is detected.
- DTC 49: Automatic transmission malfunction is detected.
- DTC 61: Malfunction in the stop light & brake switch is detected.
- DTC 62: Neutral position switch malfunction is detected.
- DTC 63: Malfunction of vehicle speed signal variation is detected.
- DTC 64: Malfunction related to engine is detected.
- DTC 65: Cruise control command switch malfunction is detected.
- DTC 66: Cruise control calculation malfunction is detected.
- Diagnostics with Phenomenon