LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal >> 4 Door Model
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

4 Door Model

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly - rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>REMOVAL .
  3. Remove the keyless entry control module.
  1. Disconnect the connector.
  2. Remove the bolt and then remove the keyless entry control module.
Fig 1: Locating Keyless Entry Control Module Connector And Bolt - 4 Door Model
G11246365Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals