LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection System (WRX)) >> Engine Coolant Temperature Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover. < Ref. to REMOVAL , Collector Covers
  2. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Notes
  3. Drain engine coolant. < Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolants
  4. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G10266199Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals