LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Limited, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (WRX) >> Tumble Generator Valve Assembly >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Tumble Generator Valve Assembly: Removal

NOTE: The tumble generator valve assembly is tightened together with the intake manifold.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
  2. Remove the intake manifold. < Ref. to REMOVAL , Intake Manifold. >
  3. Remove the air intake adapter from the cylinder head.
    • RH side
      Fig 1: Locating Tumble Generator Valve Assembly Bolts (RH Side)
      G10266121Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Fig 2: Locating Tumble Generator Valve Assembly Bolts (LH Side)
      G09479645Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the cylinder head plate from cylinder head.
    Fig 3: Locating Cylinder Head Plate
    G10266123Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals