Model With Keyless Access With Push Button Start

NOTE: Immobilizer antenna is integrated with the push button ignition switch.

Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
Remove the push button ignition switch.
1. Disconnect the connector, and remove the aspirator hose.
  
  Fig 1: Locating Aspirator Hose Connector
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws, and then remove the panel - switch.
3. Release the claws, and then remove the push button ignition switch from the panel - switch.
  
  Fig 2: Locating Panel Switch Claws
  Courtesy of SUBARU OF AMERICA, INC.