LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System (Diagnostics) >> Inspection Mode >> Operation >> Inspection Mode 2
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Mode 2

DTC Item Note
B2300 Rear Radar Circuit Low -
B2301 Rear Radar Circuit High -
  1. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
  2. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step  1).
  3. Start the engine.
  4. Perform the System Operation Check Mode «Door mirror indicator active test». < Ref. to SYSTEM OPERATION CHECK MODE . >
  5. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
scientia non olet · About LEMON Manuals