LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Power Rear Gate (Service Information) >> Power Rear Gate Control Module >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Rear Gate Control Module: Installation

  1. Install the power rear gate control module (PRG control module).
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel - rear apron LH.
  3. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
scientia non olet · About LEMON Manuals