Drive Cycle C
| DTC | Item | Condition |
|---|---|---|
| P0500 | Vehicle Speed Sensor "A" | - |
| P0716 | AT turbine speed | - |
| P0717 | Turbine speed sensor A circuit (signal no input) | - |
| P0720 | Output speed sensor circuit | - |
| P0721 | AT vehicle speed sensor circuit (characteristics) | - |
| P0970 | Transfer solenoid circuit (low) | - |
| P0971 | Transfer solenoid circuit (high) | - |
| P0973 | Primary solenoid system A circuit (low) | - |
| P0974 | Primary solenoid system A circuit (high) | - |
| P0976 | Primary solenoid system B circuit (low) | - |
| P0977 | Primary solenoid system B circuit (high) | - |
| P2158 | Vehicle speed sensor "B" | - |
| P2746 | Primary pulley revolution speed sensor circuit | - |
| P2747 | Primary speed sensor circuit (signal no input) | - |
| P2750 | Sec. pulley revolution speed sensor circuit | - |
| P2751 | Secondary speed sensor circuit (signal no input) | - |
| P2763 | Lock-up duty solenoid circuit (high) | Perform the drive cycle A, then perform the drive cycle C. |
| P2764 | Lock-up duty solenoid circuit (low) | - |
| P2769 | Lock-up ON/OFF solenoid circuit (low) | - |
| P2770 | Lock-up ON/OFF solenoid circuit (high) | - |
Diagnostic procedure:
- Start the engine.
- Accelerate slowly to a legal speed, and then decelerate slowly to a stop.