Section 132 (Blind Spot Detection System (Diagnostics))
WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
- Basic Diagnostic Procedure
- Check List for Interview
- General Description
- Electrical Component Location
- Control Module I/O Signal
- Subaru Select Monitor
- Read Diagnostic Trouble Code (DTC)
- Clear Memory Mode
- Read Cancel Code
- Inspection Mode
- Read Current Data
- System Operation Check Mode
- List of Diagnostic Trouble Code (DTC)
- List of Cancel Code
- Diagnostic Procedure with Diagnostic Trouble Code (DTC)
- DTC B2300 Rear Radar Circuit Low
- DTC B2301 Rear Radar Circuit High
- DTC B2304 Rear Radar On-Off Switch Stuck
- DTC B2311 Rear Radar Detect TCM
- DTC B2313 Rear Radar Detect VDC
- DTC B2327 Rear Radar Internal Failure (Internal Electric Circuit)
- DTC B2329 Rear Radar Axis Alignment Incomplete
- DTC B2350 Rear Radar Communication Error Between Master And Slave
- DTC U0073 Control Module Communication Bus Off
- DTC U0101 Lost Communication With TCM
- DTC U0122 Lost Communication With Vehicle Dynamics Control Module
- DTC U0140 Lost Communication With Body Control Module
- DTC U0155 Lost Communication With Instrument Panel Cluster (IPC) Control Module
- DTC U0402 Invalid Data Received From TCM
- DTC U0416 Invalid Data Received From Vehicle Dynamics Control Module
- DTC U0422 Invalid Data Received From Body Control Module
- DTC U0423 Invalid Data Received From Instrument Panel Cluster Control Module
- Diagnostic Procedure with Cancel Code
- Diagnostics with Phenomenon