September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Check Accelerator Pedal Sensor Area (Method With Circuit Tester)
- Remove the glove box. < Ref. to
REMOVAL
, Glove Box. >
- Turn the ignition switch to ON. (Engine OFF)
- Measure the voltage between ECM connector terminals.
- Main sensor side
- Sub sensor side
| Accelerator pedal sensor |
Accelerator pedal |
Terminal No. |
Standard |
| Main |
Not depressed (full closed) |
23 (+) and 29 (-) |
0.4 - 1.0 V |
| Depressed (full opened) |
2.4 - 3.7 V |
| Sub |
Not depressed (full closed) |
31 (+) and 30 (-) |
0.3 - 1.1 V |
| Depressed (full opened) |
2.3 - 3.8 V |
- After inspection, install the related parts in the reverse order of removal.