LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Limited, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Intake Air Flow Meter Sub-Assembly (Fa20) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Air Flow Meter Sub-Assembly (Fa20): Removal

  1. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
  2. Removal of intake air flow meter sub-assembly
    1. Disconnect the connector for intake air flow meter sub-assembly.
    2. Remove 2 screws, and remove the intake air flow meter sub-assembly.
      Fig 1: Locating Intake Air Flow Meter Sub-Assembly Screws
      G10213028Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals