LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Universal Joint >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Universal Joint: Removal

  1. Remove the universal joint assembly - steering.
    1. Place alignment marks on the universal joint assembly - steering.
      NOTE: Place alignment marks on the following positions.
      • Between the column assembly - steering and the universal joint assembly - steering
      • Between the steering gearbox assembly and the universal joint assembly - steering
    2. Remove the bolt, and remove the universal joint assembly - steering.
    Fig 1: Locating Universal Joint Assembly Bolt - Steering
    G08316046Courtesy of SUBARU OF AMERICA, INC.
  2. Set the steering column and the driver's seat to the neutral position.
    CAUTION: Always place the tilt lever to the lock position after the steering column is adjusted.
  3. Prevent the steering wheel from turning using the seat belt.
Fig 2: Adjusting Steering Column
G10270100Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals