LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except STI) >> Oxygen Sensor Relay >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oxygen Sensor Relay: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
  2. Remove the instrument panel lower cover. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
  3. Remove the nut and bolt, and move the fuse block downwards.
    Fig 1: Locating Fuse Block Nuts And Bolts
    G09475594Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oxygen sensor relay from the relay block.
    Fig 2: Locating Oxygen Sensor Relay
    G09475595Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals