September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Transmission Control Device: Removal
- Remove the transmission assembly from the vehicle. <Ref. to
REMOVAL , Automatic Transmission Assembly.>
- Remove the oil pan and control valve body. <Ref. to
REMOVAL , Control Valve Body.>
- Remove the inhibitor switch. <Ref. to
REMOVAL , Inhibitor Switch.>
- Remove the spring pin.
NOTE:
Prevent the spring pin from dropping in the transmission using paper towel etc.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the bolt and remove the range select lever, manual plate and parking rod.
NOTE:
Do not damage the lip of oil seal press-fitted in the case.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the detent spring.
Courtesy of SUBARU OF AMERICA, INC.