LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Rear Vehicle Detection System (Diagnostics)) >> Inspection Mode >> Operation >> Inspection Mode 2
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Mode 2

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DTC Item Note
B2300 Radar ASSY B&S Led Short Circuit to Earth -
B2301 Radar ASSY B&S Led Open Circuit or Short Circuit to Power Supply -
  1. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
  2. Read the DTC and check that the DTC is not displayed. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step  1).
  3. Start the engine.
  4. Perform the System Operation Check Mode «Door mirror indicator active test». <Ref. to SYSTEM OPERATION CHECK MODE .>
  5. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. <Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .>
scientia non olet · About LEMON Manuals