LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Vehicle Dynamics Control (VDC) System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Maintenance Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Maintenance Mode

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Display Contents of display Index No.
Brake Maintenance Mode Used when inspecting and repairing parts related to rear brake. <Ref. to BRAKE MAINTENANCE MODE , MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U).>
Reading of parameter: ECM to SSM Read VDCCM parameter data. <Ref. to VDCCM PARAMETER READING , MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U).>
Writing of parameter: SSM to ECM Write the parameter data to the VDCCM. <Ref. to VDCCM PARAMETER WRITING , MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U).>
Select Parameter Select and register parameters in the VDCCM. <Ref. to VDCCM PARAMETER SELECTION , MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U).>
Confirm on parameter Parameters registered in the VDCCM are displayed. <Ref. to VDCCM PARAMETER CHECK , MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U).>
scientia non olet · About LEMON Manuals