LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Starting System & Charging System (H4DO)) >> Battery Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Sensor: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
    Fig 1: Locating Battery Sensor Bolt
    G10263203Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals