Clear Memory Mode
WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Clear the DTC stored in the airbag control module after repairing the airbag system and occupant detection system. (After the breakdown is recovered, the breakdown code for completed recoveries are read out when the next breakdown occurs if the memory clear work is not performed.)
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Airbag System}.
- Select {Clear Memory} in {Airbag System} menu screen.
- When the "Clear Memory?" is shown on the screen, select [OK].
- When Done is displayed, terminate the Subaru Select Monitor and turn the ignition switch to OFF.NOTE: For details concerning the operation procedure, refer to "PC application help for Subaru Select Monitor".