LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Power Rear Gate (Service Information)) >> Memory Height Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Memory Height Switch: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback, 2016 Subaru Legacy, 2015 Subaru Outback, and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Release the claws and remove the memory height switch.
    Fig 1: Identifying Memory Height Switch
    G10309992Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals