LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except STI) >> Fuel Insulator >> Removal >> Fuel Pipe Insulator No. 3
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pipe Insulator No. 3

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
  2. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold.>
  3. Disconnect the connector (A) from the EGR control valve.
  4. Remove the bolts (B) securing the EGR cooler to the EGR control valve.
  5. Remove the preheater hose (C) from the EGR control valve.
    Fig 1: Identifying EGR Control Valve Connector, Bolts And Preheater Hose
    G09479651Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the EGR control valve.
    Fig 2: Locating EGR Control Valve Bolts
    G09479652Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector (A) on the fuel pressure sensor, and remove the fuel pipe insulator No. 3.
    Fig 3: Identifying Fuel Pressure Sensor Connector
    G09479653Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals