Read Current Data: Operation

Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.

On «Main Menu» display, select «Each System Check».
On «System Selection Menu» display, select «Airbag System».
On «Airbag System» display, select «Current Data Display & Save».

Item	Display	Note
Trip Count	-	<Ref. to TIME STAMP , CAUTION, General Description.>
Count	-
Time Count	-
Belt Buckle Switch LH	Unbelted/Belted/Other	"Belted" when the left side seat belt is fastened "Unbelted" when the left side seat belt is not fastened "Other" in other cases
Belt Buckle Switch RH	Unbelted/Belted/Other	"Belted" when the right side seat belt is fastened "Unbelted" when the right side seat belt is not fastened "Other" in other cases
Passenger Occupant Status	Occupied/Adult/Child/Empty or CRS	"Occupied" when the occupant is present "Adult" "Child" "Empty or CRS" when the seat is unoccupied or when child restraint seat is installed CAUTION: When checking the operating status, be careful of the followings. When the seat is unoccupied: Do not place anything on the seat. Child restraint seat: Install the seat according to its instruction manual. When the seat is occupied: Someone who weighs at least approx. 70 kg (155 lbs) must be seated during the check.
Passenger Airbag Status	ON/OFF	"ON" when the passenger occupant status is "Occupied" "OFF" when the status is "Empty or CRS"
Data record No.	Not assign/1	Displays "1" when any EDR data is recorded.
Data record No.	Not assign/1	Displays "1" when any EDR data is recorded.

NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".