VDCCM Parameter Writing

Connect the Subaru Select Monitor.
On «Main Menu» display, select «Each System Check».
On «System Selection Menu» display, select «Brake Control System».
On «Brake Control System» display, select «ABS/VDC System».
When «VDC/parking brake» is displayed, select the [OK] button.
On «Brake Control Diagnosis» display, select «Work Support».
On «Work Support» display, select «Maintenance at the time of ECM replacement».
Select «Writing of parameter: SSM to ECM».
Open the file saved in the «Reading of parameter: ECM to SSM» procedure.
When the confirmation screen indicating the vehicle information appears, check that the correct applied model and grade are displayed and click the [OK] button.