LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection Fuel Systems (H4DOTC) >> Crankshaft Position Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Removal

  1. Remove the clip (A), lift the front of the collector cover in the direction of arrow, and then remove the collector cover.
    Fig 1: Removing Front Collector Cover
    G09479721Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the ground cable from battery.
  3. Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
  4. Remove the throttle body. < Ref. to REMOVAL , Throttle Body. >
  5. Remove the bolts securing the engine harness.
    Fig 2: Locating Engine Harness Bolts
    G09479729Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector (A) from the crankshaft position sensor, and remove the crankshaft position sensor from the cylinder block.
    Fig 3: Locating Crankshaft Position Sensor Connector
    G09479730Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals