LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> BRZ Series.Blue, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Camshaft Timing Oil Control Valve Assembly (Fa20) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Timing Oil Control Valve Assembly (Fa20): Installation

  1. Installation of camshaft timing oil control valve assembly (bank 2 exhaust side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  2. Installation of camshaft timing oil control valve assembly (bank 2 intake side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  3. Installation of air cleaner case sub-assembly (Refer to ON-VEHICLE INSPECTION )
  4. Installation of camshaft timing oil control valve assembly (bank 1 exhaust side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  5. Installation of camshaft timing oil control valve assembly (bank 1 intake side)
    1. Install the back-up ring to the camshaft timing oil control valve assembly.
    2. Apply engine oil to new O-ring, and attach it to the camshaft timing oil control valve assembly.
    3. Using 2 bolts, install the camshaft timing oil control valve assembly.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}

    4. Connect the connector for camshaft timing oil control valve assembly.
  6. Connection of the battery ground terminal

    Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}

scientia non olet · About LEMON Manuals