LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> BRZ Limited, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control (VSC) System >> Vehicle Stability Control System >> Checking/Clearing Diagnostic Codes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Checking/Clearing Diagnostic Codes

  1. Diagnostic code output check
    1. Diagnostic code reading by SSM3
      1. Connect SSM3 to DLC3 with IG turned OFF.
      2. Turn IG ON and follow SSM3's display to read the diagnostic code.
        CAUTION: If there is an error, clear the diagnostic code memory after repairing.
  2. Clear the diagnostic code and the freeze frame data.
    1. Diagnostic code clearance by SSM3
      1. Connect SSM3 to DLC3 with IG turned OFF.
      2. Turn IG ON and follow SSM3's display to clear the diagnostic code.
scientia non olet · About LEMON Manuals