LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> BRZ Limited, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Power Window System >> Relay >> Unit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Unit Inspection

  1. Inspection of defogger relay
    1. Measure the resistance between connector terminals as shown below.

      Resistance

      RESISTANCE SPECIFICATION

      Inspection terminals Inspection conditions Standard value
      3 - 5 When battery voltage is not applied between terminals 1 - 2. 10 kΩ or more
      When battery voltage is applied between terminals 1 - 2. Less than 1 Ω
      Fig 1: Inspecting Defogger Relay
      G10217505Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals