LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Injector Assembly (Fa20/Port Fuel Injection) >> Unit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Unit Inspection

  1. Fuel injector Assembly check
    CAUTION: This procedure must be used only when judging short circuit and open circuit. It cannot be used for judging defective operation.
    1. Resistance check
      1. Measure the resistance between the terminals.

        Resistance

        Inspection terminals Inspection conditions Standard value
        1 - 2 20°C {68°F} 12 Ω
        Fig 1: Fuel Injector Assembly Connector Terminal Identification
        G10213423Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals