September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Unit Inspection
- Inspect the battery current sensor assembly.
- Resistance check (Battery current sensor assembly).
- Measure the resistance between the terminals.
RESISTANCE
| Inspection terminals Tester positive - Tester negative |
Inspection conditions |
Standard value |
| 1(VIN) - 3(GND) |
Always |
3 - 10 kΩ |
| 1(VIN) - 4(VOUT) |
Always |
0.5 kΩ or less |
| 3(GND) - 4(VOUT) |
Always |
3 - 10 kΩ |
Courtesy of SUBARU OF AMERICA, INC.
- Resistance check (Battery thermometer sensor).
- Measure the resistance between the terminals.
RESISTANCE
| Inspection terminals |
Inspection conditions |
Standard value |
| 2(TEMP) - 3(GND) |
20 - 30°C {68 - 86°F} |
1.5 - 2.6 kΩ |
Courtesy of SUBARU OF AMERICA, INC.
NOTE:
The standard value expresses the temperature of the sensor surroundings, rather than the temperature of the temperature sensor unit.