October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Rear Regulator and Motor Assembly: Inspection
- Disconnect the motor connector.
- Apply battery voltage between the motor connector terminals and check the motor operation. Check to ensure that the motor rotates in reverse direction when the terminal to which battery voltage is applied is changed.
Courtesy of SUBARU OF AMERICA, INC.
- RH side
| Terminal No. |
Inspection conditions |
Specification |
| 1 (+) - 4 (-) |
Apply battery voltage between terminals |
Increase |
| 4 (+) - 1 (-) |
Apply battery voltage between terminals |
Decrease |
- LH side
| Terminal No. |
Inspection conditions |
Specification |
| 3 (+) - 6 (-) |
Apply battery voltage between terminals |
Increase |
| 6 (+) - 3 (-) |
Apply battery voltage between terminals |
Decrease |
- If the inspection results in improper operation, replace the rear regulator and motor assembly.