Turbine Speed Sensor Replacement
Turbine Speed SensorREMOVAL
CAUTION:
Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.
1) Lift up the vehicle.
2) Remove the harness connector from turbine speed sensor.
3) Remove the turbine speed sensor.
INSTALLATION
CAUTION:
Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.
Install in the reverse order of removal.
NOTE:
^ Use new O-rings.
^ Apply CVTF to the O-ring.
Tightening torque:
7 Nm (0.7 kgf-m, 5.2 ft-lb)